ICL7665AEPA
| Parameters | |
|---|---|
| Mount | DIP, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | ICL7665 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 3μA |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 2 |
| Reset Timeout | <1ms Minimum |
| Undervoltage Threshold | 1.225V |
| Overvoltage Threshold | 1.375V |
| Length | 9.375mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ICL7665AEPA Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaging is in the form of a Tube. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 2 channels. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. The package peak reflow temperature is specified to be 240. When 5V is applied to the power ic, it conducts. Power ics operate at 2 supply voltages. The power management is mounted by a DIP, Through Hole-axis. There is a subcategory called Power Management Circuits for this power management. A total of 8 pins are located on this power management. 8 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.6V. There should be no more than 16V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Through Hole type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The supervisor's supply current is specified to 3μA. A similar IC managements number of the manufacturer can always be found by using ICL7665, the base power ics number. In order to operate this power management, it requires 5V volts of power. The power management can work with a maximum supply temperature of 15μA.
ICL7665AEPA Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.6V
3μA operating supply current
ICL7665AEPA Applications
There are a lot of Maxim Integrated ICL7665AEPA Voltage Supervisors applications.
- Battery-powered equipment
- Sensitive sensors
- DC stabilized power supply module
- Military electronics
- Consumer electronics
- Cloud computing
- Transformer load monitoring equipment
- Leakage protection
- Stable power system
- Urban rail transit weak current power monitoring
