ICL7665AESA+
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ICL7665 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 10μA |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 2 |
| Reset Timeout | <1ms Minimum |
| Min Reset Threshold Voltage | 1.225V |
| Max Reset Threshold Voltage | 1.375V |
| Threshold Voltage | +1.3V |
| Undervoltage Threshold | 1.225V |
| Overvoltage Threshold | 1.375V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
ICL7665AESA+ Overview
A total of 8 terminals are used to mount this power management. Power management is packaged in a Tube way. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 2 channels that can be found. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 5V volt supply. Power ics operate at 2 supply voltages. The mount is provided by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. 8 pins make up the power management. IC management can only work with a supply voltage of 2V volts. The maximum supply voltage (Vsup) is not to exceed 16V volts in this IC management. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. The supply current of the power management is 15μA. For similar manage ics search of the manufacturer, you can always refer to ICL7665, the base PMIC number. In order to operate this power management, it requires 5V volts of power. At most, voltage supervisor can operate at a supply temperature of 15μA.
ICL7665AESA+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current
ICL7665AESA+ Applications
There are a lot of Maxim Integrated ICL7665AESA+ Voltage Supervisors applications.
- Electrical fire monitoring system
- Analog circuit
- Personal computers
- Electronics installed in the vehicle
- Display equipment
- DVR
- Detection of phase imbalance
- WiFi router
- Digitally controlled LDO regulators circuit
- Cloud computing
