ICL7665AESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ICL7665 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 15μA |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 2 |
| Reset Timeout | <1ms Minimum |
| Undervoltage Threshold | 1.225V |
| Overvoltage Threshold | 1.375V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ICL7665AESA+T Overview
Power management is mounted through 8 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 2 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts at a voltage of 5V. Power ics operate at 2 supply voltages. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 8 pins in it. A voltage (Vsup) that doesn't fall below 2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 16V volts of maximum supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 15μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using ICL7665, the base power ics number. To be able to work, this power management requires 5V volts of power. At most, voltage supervisor can operate at a supply temperature of 15μA.
ICL7665AESA+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current
ICL7665AESA+T Applications
There are a lot of Maxim Integrated ICL7665AESA+T Voltage Supervisors applications.
- Solar power charger
- Power distribution systems of infant care room
- Power distribution systems of operating room
- Radio
- Insulation fault location system
- Important electronics for automotive safety
- Electric heating appliances
- Embedded computing
- Electronics installed in the vehicle
- Sensitive sensors
