banner_page

ICL7665EPA

5V8 Terminals 8-Pin ICL7665 Voltage supervisor2 Channels Min 1.6V Max 16V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-ICL7665EPA
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 210
  • Description: 5V8 Terminals 8-Pin ICL7665 Voltage supervisor2 Channels Min 1.6V Max 16V (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 1997
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Multi-Voltage Supervisor
Subcategory Power Management Circuits
Max Power Dissipation 727mW
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number ICL7665
Output Open Drain or Open Collector
Pin Count 8
Power Supplies 5V
Number of Channels 2
Max Supply Voltage 16V
Min Supply Voltage 1.6V
Max Supply Current 15μA
Adjustable Threshold NO
Watchdog Timer No
Reset Active High
Voltage - Threshold Adjustable/Selectable
Number of Voltages Monitored 2
Reset Timeout <1ms Minimum
Length 9.375mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

ICL7665EPA Overview


As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. There is a Tube-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. Power management consists of 2 channels, each of which can be used independently. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 240 for the package during reflow. IC management conducts in a 5V-voltage supply. When 2 is applied to the power ic, it conducts. The power management is mounted by a Through Hole-axis. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 8. Power managment ic pin count is 8. IC management can only work with a supply voltage of 1.6V volts. The maximum supply voltage (Vsup) is not to exceed 16V volts in this IC management. The recommended mounting type is Through Hole. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to ICL7665, which is the base power ics number. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. Voltage supervisor can work with a supply temperature of 15μA at the most.

ICL7665EPA Features


Multi-Voltage Supervisor type
Minimum supply voltage of 1.6V

ICL7665EPA Applications


There are a lot of Maxim Integrated ICL7665EPA Voltage Supervisors applications.

  • Radar
  • External alarm
  • Household appliances
  • Power distribution systems of operating room
  • Insulation fault location system
  • Detection of phase imbalance
  • DSP
  • Urban rail transit weak current power monitoring
  • Radio
  • Smartphones

Write a review

Note: HTML is not translated!
    Bad           Good