ICL7667CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~17V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ICL7667 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 7mA |
| Output Current | 1.5A |
| Max Supply Current | 7mA |
| Input Type | Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 µs |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.06 µs |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ICL7667CPA+ Overview
A higher degree of flexibility is achieved by adopting its 8-DIP (0.300, 7.62mm) package.Tube is the form of the package.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Through Hole is mounted in the way.In the absence of a 4.5V~17V supply voltage, its superiority can be demonstrated.This device is designed with a N-Channel MOSFET gate type.Temperature range 0°C~150°C TJ is allowed for this device.Inverting is used as the input type.Initially, the configuration is composed of 8 terminations.Numerous related parts can be found under its base part number ICL7667.The device is mounted using Through Hole.As a result, it is configured with 8 pins when it is designed.The device is specifically designed to operate at 15V volts.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.1.5A is the maximum output current.Several electronic components are included in its subcategory of MOSFET Drivers.The board has a total of 8 component pins.This device supports a current output of 1.5A at the output.This device has a maximum power dissipation of 300mW, indicating that it is capable of reducing power loss without overheating.Keeping the supply current at 7mA ensures greater stability.Mosfet gate drivers is recommended that the operating supply voltage be set to 15V volts.
ICL7667CPA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 300mW
ICL7667CPA+ Applications
There are a lot of Maxim Integrated ICL7667CPA+ gate drivers applications.
- Telecom switch mode power supplies
- Smart Phones
- Industrial Modules
- Motor Drives
- LCD/LCoS/DLP portable and embedded pico projectors
- DC-DC Converters
- AC-DC Inverters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High frequency line drivers
- Industrial Motor Inverter - Power Tools, Robotics
