ICL7667EBA
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | ICL7667 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 7mA |
| Output Current | 10mA |
| Max Supply Current | 7mA |
| Input Type | Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 µs |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.06 µs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 200mW |
| Voltage - Supply | 4.5V~17V |
| Terminal Position | DUAL |
ICL7667EBA Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Tube represents the package.Gate drivers is configured wGate driversh 2 drivers.There is a mounting bracket in the way of Surface Mount.WGate driversh a 4.5V~17V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.A gate type of N-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of 0°C~150°C TJ.Mosfet driver accepts input of type Inverting.Initially, the configuration is composed of 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number ICL7667.Mosfet driver is mounted using the Surface Mount method.The pins are configured with 8 when designing the chip.With a supply voltage of 15V, it is designed to operate.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.Several electronic components are included in its subcategory of MOSFET Drivers.A total of 8 pins are available for component connections.The device is capable of delivering a current of 10mA.Based on its maximum power dissipation of 200mW, it is clear that it is capable of transferring and conducting power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 7mA in order to achieve greater stabilMosfet gate driversy.The operating supply voltage should be set at 15V.
ICL7667EBA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 200mW
ICL7667EBA Applications
There are a lot of Maxim Integrated ICL7667EBA gate drivers applications.
- A/D drivers
- Dual-Battery Systems
- High current laser/LED systems
- RGB applications
- High-speed communications
- Power factor correction (PFC) circuits
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Line drivers
- Refrigerator
- Solar inverters
