ICL7667EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 300mW |
| Voltage - Supply | 4.5V~17V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ICL7667 |
| Pin Count | 8 |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 7mA |
| Max Supply Current | 7mA |
| Input Type | Inverting |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 µs |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.06 µs |
| Length | 9.375mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ICL7667EPA+ Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.Tube is the form of the package.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.In the direction of Through Hole, gate drivers is mounted.When the supply voltage is set to 4.5V~17V, it can demonstrate its superiority.Gate type N-Channel MOSFET is designed for it.This device allows temperatures in the range of 0°C~150°C TJ.The input type is Inverting.As a result of its configuration, it contains a maximum of 8 terminations.Numerous related parts are available for its base part number ICL7667.Mosfet driver is mounted using Through Hole.Devices have 8 pins available.Specification is for 15V supply voltage operation.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.There are 8 component pins on the board.Based on the maximum power dissipation of 300mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Mosfet gate drivers is recommended that you keep the supply current at 7mA in order to achieve greater stabilMosfet gate driversy.Due to its power supplies of 4.5/15V, it solves the power supply problem for a wide range of applications.
ICL7667EPA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 300mW
ICL7667EPA+ Applications
There are a lot of Maxim Integrated ICL7667EPA+ gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Head-up and Head mounted displays
- Industrial Power Supplies
- A/D drivers
- Line drivers
- Industrial motor drives - compact, standard, premium, servo drives
- RGB applications
- High-voltage isolated DC-DC converters
- Power factor correction (PFC) circuits
- Motor Control
