ICM7218AIPI
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Operating Temperature | -20°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | ICM7218 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 6V |
| Power Supplies | 5V |
| Configuration | 7 Segment |
| Interface | Serial |
| Operating Supply Current | 250μA |
| Power Dissipation | 1W |
| Output Current | -170mA |
| Max Supply Current | 950μA |
| Min Input Voltage | 2V |
| Max Input Voltage | 6V |
| Output Characteristics | TOTEM-POLE |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Display Type | LED |
| Number of Segments | 64 |
| Multiplexed Display Capability | YES |
| Digits or Characters | 8 Digits |
| Height | 4.45mm |
| Length | 37.34mm |
| Width | 14.61mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ICM7218AIPI Overview
The package follows the same design pattern as Tube.A package with version 28-DIP (0.600, 15.24mm) includes it.Its display type is LED.Mounting this electronic component on the board is done using Through Hole.During normal use, this electrical part has an operating temperature of -20°C~85°C.If you use a 2V~6VV power source, it should work.Ending transmission lines with 28 terminations offers devices with the same characteristic impedance as the transmission lines themselves.Display drivers is a member of the ICM7218 family.In a 28-pin device, everything is connected.As a result, it has 28 pins.The Surface Mount, Through Hole axis is the axis with which this electronic component is mounted on the board.5V is the supply voltage.A supply current must be supplied to 250μA for it to function fully.As part of the Seller Group's equipment solutions business, there are a number of 64 segments, including the "Electronics" segment.In addition to this, it can also be included in Display Drivers.The supply voltage should be maintained at 6V for high efficiency.Due to its two 5V power supplies, it can run anywhere in the world.In this case, 950μA is the maximum amount of current that can be supplied for its operation.In this configuration, the output is 8.
ICM7218AIPI Features
28-DIP (0.600, 15.24mm) package
ICM7218 family
28 pin count
28 pins
5V power supplies
8 output
ICM7218AIPI Applications
There are a lot of Maxim Integrated ICM7218AIPI display drivers applications.
- Industrial Display
- Battery Operated Applications
- Car Audios / Radios
- Mobile smart TV
- Vacuum Fluorescent Displays
- Climate Controls
- Industrial control panels
- Numerlc and Non-Numerlc Panel Dlsplays
- Relay Driver
- Metering
