ICM7218CIJI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Active |
| Number of Terminations | 28 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ONE DECIMAL POINT OUTPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Number of Outputs | 16 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 2.5mA |
| Max Supply Current | 2.5mA |
| Current - Output | 50mA |
| Voltage - Output | 2.5V |
| Min Input Voltage | 2V |
| Max Input Voltage | 6V |
| Interface IC Type | LED DISPLAY DRIVER |
| Number of Segments | 64 |
| Multiplexed Display Capability | YES |
| Display Mode | SEGMENT |
| Number of Digits/Characters | 8-DIGIT |
| Height Seated (Max) | 5.92mm |
| Width | 15.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
ICM7218CIJI Overview
The CDIP package is used for saving board space. Using this LED driver, there are 16 outputs.For its operation, terminations with a value of 0 are used.Its configuration is based on 28 pins.A total of 64 segments are estimated.It's mounted on the way to Through Hole.A maximum supply voltage of 6V is acceptable.A voltage output of 2.5V is provided by this device.28 pins are on the device.Additionally, it can be classified as Display Drivers based on its characteristics.The input voltage must be minimally 2V.It is designed to operate at a minimal voltage of 4V to achieve the highest efficiency.When the maximum supply current is allowed, it reaches 6V.This device is able to provide high efficiency when the maximal supply current should be less than 2.5mA.An operating temperature above 85°C should ensure stable operation.For stable operation, the operating temperature should be higher than -40°C.There's an interface IC marked with LED DISPLAY DRIVER on this part.Make sure the output current is set to 0 for the part.A further characteristic of this LED driver is that it is ONE DECIMAL POINT OUTPUT.
ICM7218CIJI Features
Available in the CDIP package
Supply voltage of 5V
ONE DECIMAL POINT OUTPUT
ICM7218CIJI Applications
There are a lot of Intersil (Renesas Electronics America) ICM7218CIJI LED Driver ICs applications.
- White LED Backlight for portable equipment
- Industrial LED Lighting: Image Recognition Devices
- Medical surgery lighting
- Portable lighting
- LED Lightings for Inspection Devices
- Amusement Machines
- LED Lighting PFCs, Linear Dimmable
- Flicker-free LED Lighting using R1580N
- OLED power supply for portable equipment
- Street lighting
