banner_page

ICM7225RIPL

Obsolete DUAL 5V V Display Drivers ICs Tube Tin/Lead (Sn85Pb15) not_compliant 30 not_compliant


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-ICM7225RIPL
  • Package: 40-DIP (0.600, 15.24mm)
  • Datasheet: -
  • Stock: 551
  • Description: Obsolete DUAL 5V V Display Drivers ICs Tube Tin/Lead (Sn85Pb15) not_compliant 30 not_compliant (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 40-DIP (0.600, 15.24mm)
Number of Pins 40
Operating Temperature -20°C~85°C
Packaging Tube
Published 1996
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 40
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
HTS Code 8542.39.00.01
Technology CMOS
Voltage - Supply 4V~6V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number ICM7225
Pin Count 40
Qualification Status Not Qualified
Operating Supply Voltage 6V
Configuration 7 Segment
Operating Supply Current 200mA
Power Dissipation 1W
Display Type LED
High Level Output Current 500μA
Low Level Output Current 500μA
fmax-Min 15 MHz
Number of Segments 30
Multiplexed Display Capability NO
Data Input Mode SERIAL
Digits or Characters 4.5 Digits
Height Seated (Max) 5.08mm
Length 52.075mm
Width 15.24mm
RoHS Status Non-RoHS Compliant

ICM7225RIPL Overview


The package follows the same design pattern as Tube.Display drivers is embedded in the 40-DIP (0.600, 15.24mm) package.I would like to point out that this electrical device has a LED display type.In order to mount this electronic component on the board, Through Hole is used.Display drivers is recommended that this electrical part be operated at a temperature of -20°C~85°C.If you use a 4V~6VV power source, it should work.An impedance-matching device is used to terminate transmission lines using a 40 termination.The device belongs to the ICM7225 family.In a 40-pin device, everything is connected.As a matter of fact, it has 40 pins installed.The Through Hole axis is used by the board manufacturer in order to mount this electronic component.The power source is powered by voltage 5V.In order for 200mA to perform its full function, a supply current needs to be provided for it.30 segments refer to any member of the Seller Group's equipment solutions business that falls under the category of "Electronics.".A high level of efficiency can be achieved by maintaining the supply voltage at 6V.

ICM7225RIPL Features


40-DIP (0.600, 15.24mm) package
ICM7225 family
40 pin count
40 pins

ICM7225RIPL Applications


There are a lot of Maxim Integrated ICM7225RIPL display drivers applications.

  • Driving common-cathode LED displays
  • Mobile projector
  • Gaming Machines Security
  • Instrumentation Industrial Control
  • General-purpose displays
  • Industrial Controllers and Instrumentation
  • Professional Audio Equipment
  • White Goods
  • COPS? or Microprocessor Displays
  • Instrumentation

Write a review

Note: HTML is not translated!
    Bad           Good