ICM7556MJD
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 14 |
| Packaging | Bulk |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Analog Waveform Generation Functions |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 255 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Current Rating | 60A |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/15V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SQUARE |
| Operating Supply Current | 120μA |
| Nominal Supply Current | 120μA |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ICM7556MJD Overview
There is a CDIP that comes with the timer clock, which is enclosed in the packaging. 1MHz is set as the frequency of the programmable timer.It is used to pack in Bulk case. To mount this digital timer with Through Hole. The operating supply voltage is rated at 120μA voltage. The minimum operating temperature of the chip must not be lower than -55°C. It's best to use the timer clock when the temperature is below 125°C. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 14 . The number of the chip's terminations sums up to 14. Its subcategory belongs to Analog Waveform Generation Functions. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 18V.
ICM7556MJD Features
Operate frequency at 1MHz
Package / Case: Bulk
Max Operating temperature at -55°C
ICM7556MJD Applications
There are a lot of Intersil (Renesas Electronics America) ICM7556MJD Programmable Timers & Oscillators applications.
- High Vibration, High Acceleration Environments
- Low-Power Wireless
- Power-Gating Applications
- Remote Sensors
- Domestic appliances
- Clutch Actuator circuit
- Safety and Security Platforms
- Battery Powered Systems
- White Goods
- Watchdog Timers
