ID82C59A-12
| Parameters | |
|---|---|
| Number of External Interrupts | 8 |
| Bus Compatibility | 80C86; 80C88; 80C286; 8080; 8085; 8086; 8088; 80286; NSC800 |
| RoHS Status | Non-RoHS Compliant |
| Surface Mount | NO |
| Published | 2017 |
| JESD-609 Code | e0 |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Interrupt Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Pin Count | 28 |
| JESD-30 Code | R-GDIP-T28 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| uPs/uCs/Peripheral ICs Type | INTERRUPT CONTROLLER |
| Clock Frequency | 12.5MHz |
| Supply Current-Max | 12.5mA |
| External Data Bus Width | 8 |
ID82C59A-12 Overview
It has 28terminations.Make sure this device is set to 5V.Operation is carried out using the 28pins.Electronic components are of the Interrupt Controllersfamily.Potentiometers conduct at 85°C volts.The number of uPs, uCs, and peripheral ICs that are incorporated into this device is INTERRUPT CONTROLLER.As far as voltage delivery is concerned, it is capable of delivering voltage at 5V.A temperature of -40°C is the minimum operating temperature for the component.In order for it to perform properly, its output frequency should not exceed 12.5MHz.
ID82C59A-12 Features
Set the part at 5V volts
INTERRUPT CONTROLLER of uPs/uCs/Peripheral ICs Type
ID82C59A-12 Applications
There are a lot of Intersil (Renesas Electronics America) ID82C59A-12 Specialized Interface ICs applications.
- Microprocessor Controlled Analog Systems
- Cellular phones
- Cross Connects
- PDAs
- Medical/Industrial
- Medical systems
- Channel Banks
- Video switching
- HDTV
- Short/Medium Loop: approximately 2000 ft. of 26 AWG,
