IDT7200L15SOI8
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 256X9 |
| Memory Width | 9 |
| Standby Current-Max | 0.005A |
| Memory Density | 2304 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
IDT7200L15SOI8 Overview
FIFO memory chip is contained in the SOIC package.This FIFO memory chip is packaged as a Tape & Reel (TR) .Surface Mount is recommended as the mounting method.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains 28 terminations.The maximum current required for its operation is 80mA .FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.85°C °C is the memory logic's maximum operating temperature that allows stable operation.It is self-contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.As a result, it contains a total of 28 pins.In normal circumstances, the component has 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .It is set to 5.5V volts for the FIFO memory IC's maximum supply voltage.Ideally, the supply voltage (Vsup) should stay above 4.5V .There is 40MHz frequency set for the clock of the FIFO memory IC.
IDT7200L15SOI8 Features
FIFOs category
Clock frequency of 40MHz
IDT7200L15SOI8 Applications
There are a lot of Integrated Device Technology (IDT) IDT7200L15SOI8 FIFOs Memory applications.
- Disk Controllers
- Application that requires re-writable nonvolatile parameter memory
- SPD for DDR3 Memory Modules
- Video time base correction
- Signal processing
- Communications
- Test Equipment
- Data
- Consumer Systems
- SPI Bus Flash Memory Device
