IDT7200L20SO
| Parameters | |
|---|---|
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 256X9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.0005A |
| Memory Density | 2304 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
IDT7200L20SO Overview
You can find FIFO memory chip in package SOIC .The recommended mounting way is Surface Mount .When the supply voltage is 5V , high efficiency is possible.As a result of this, FIFO means contains 28 terminations.In order to operate FIFO design, a maximum current of 80mA is required.It operates at 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.A total of 28 pins are present on the FIFO memory IC.Normally, the component owns 5V power supplies.Using this gadget, RETRANSMIT can also be generated.The FIFO memory IC's maximum supply voltage is set to 5.5V .Ideally, the supply voltage (Vsup) should stay above 4.5V .The FIFO memory IC runs at a frequency of 33.3MHz .
IDT7200L20SO Features
FIFOs category
Clock frequency of 33.3MHz
IDT7200L20SO Applications
There are a lot of Integrated Device Technology (IDT) IDT7200L20SO FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- General Data Collection Applications at Low-Temperatures
- Video
- Controlled baseline
- Analog-to-digital converters
- Battery Charger
- Extended product-change notification
- GPS Offender Tracking
- A/D output buffers
- Data communications
