IDT7200L25SO
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 256X9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.0005A |
| Memory Density | 2304 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7200L25SO Overview
SOIC is a package that contains FIFO memory chip.Surface Mount is recommended as the mounting method.Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 28 terminations.FIFO design requires 80mA amps of current to operate.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.The gadget in FIFOs is self-contained.The IC of the part is OTHER FIFO memory type.There are a total of 28 pins on this FIFO memory IC.Normaly, the component is powered by 5V power supplies.Using this gadget, RETRANSMIT can also be generated.The FIFO memory IC's maximum supply voltage is set to 5.5V .A voltage above 4.5V is necessary for normal operation.The FIFO memory IC's clock runs at a frequency of 28.5MHz .
IDT7200L25SO Features
FIFOs category
Clock frequency of 28.5MHz
IDT7200L25SO Applications
There are a lot of Integrated Device Technology (IDT) IDT7200L25SO FIFOs Memory applications.
- Magnetic memories
- Microprogramming
- High-speed graphics pixel buffer
- Transistors
- Event Recorder
- SPI Bus Flash Memory Device
- Notebook
- Portable Information Devices
- Address mapping
- One assembly
