IDT7200L25SOI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Operating Mode | ASYNCHRONOUS |
| Clock Frequency | 28.5MHz |
| Supply Current-Max | 0.125mA |
| Access Time | 25 ns |
| Organization | 256X9 |
| Memory Width | 9 |
| Standby Current-Max | 0.0005A |
| Memory Density | 2304 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7200L25SOI Overview
You will find FIFO memory chip in the SOIC package.Surface Mount is memory IC's recommended mounting method.A supply voltage of 5V allows for high efficiency.FIFO consists of 28 terminations, which indicates that FIFO means is empty.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.This gadget is self-contained in?FIFOs .It has a OTHER FIFO memory type IC.The FIFO memory IC is equipped with a total of 28 pins.There are normally 5V power supplies attached to the component.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.FIFO memory IC's maximum supply voltage is set to 5.5V .As a general rule, keep the supply voltage (Vsup) above 4.5V in order to ensure normal operation.A clock on the FIFO memory IC runs at a frequency of 28.5MHz .
IDT7200L25SOI Features
FIFOs category
Clock frequency of 28.5MHz
IDT7200L25SOI Applications
There are a lot of Integrated Device Technology (IDT) IDT7200L25SOI FIFOs Memory applications.
- Analog-to-digital converters
- Rate buffers
- Extended product life cycle
- Medical Monitoring Device
- Communications
- Extended product-change notification
- Buses
- Product traceability
- Portable Information Devices
- Game Controller
