IDT7200L35SO
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 256X9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.0005A |
| Memory Density | 2304 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7200L35SO Overview
FIFO memory chip can be found in the SOIC package.It is pointing in the direction of Surface Mount .An input voltage of 5V results in high efficiency.The number of terminations in FIFO means is 28 .For its operation, 80mA is the maximum current required.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.The gadget in FIFOs is self-contained.It has a type OTHER FIFO memory IC.The FIFO memory IC has a total of 28 pins.Normaly, the component is powered by 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.In this case, the FIFO memory IC's maximum supply voltage is set to 5.5V .In order to ensure normal operation, the supply voltage (Vsup) should be kept above 4.5V .A clock running at frequency 22.2MHz is used by the FIFO memory IC.
IDT7200L35SO Features
FIFOs category
Clock frequency of 22.2MHz
IDT7200L35SO Applications
There are a lot of Integrated Device Technology (IDT) IDT7200L35SO FIFOs Memory applications.
- Buses
- Portable Information Devices
- Microprogramming
- Measurement Equipment
- Character generators
- Signal processing
- Transistors
- Product traceability
- Optical memories
- IP Camera Buffer
