IDT7200L50SO
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 15MHz |
| Access Time | 50 ns |
| Organization | 256X9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.0005A |
| Memory Density | 2304 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | RoHS Compliant |
IDT7200L50SO Overview
SOIC is a package that contains FIFO memory chip.Surface Mount is recommended as the mounting method.It is possible to achieve high efficiency with a supply voltage of 5V .FIFO means contains 28 terminations.FIFO requires a minimum of 80mA current to operate.Keeping the temperature at 0°C degrees Celsius ensures its reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .A total of 28 pins are present on the FIFO memory IC.It is normal for a component to be equipped with 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.Voltage FIFO memory IC's maximum is set to 5.5V .Keeping the supply voltage (Vsup) above 4.5V is essential for normal operation.A clock on the FIFO memory IC runs at a frequency of 15MHz .
IDT7200L50SO Features
FIFOs category
Clock frequency of 15MHz
IDT7200L50SO Applications
There are a lot of Integrated Device Technology (IDT) IDT7200L50SO FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Video Processing
- Emulators
- Measurement Equipment
- PC peripheral
- Desktop Computers
- Laser Receiver System
- Firmware loaders
- Computers
- Portable Information Devices
