IDT7201LA15SOI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 512X9 |
| Memory Width | 9 |
| Standby Current-Max | 0.005A |
| Memory Density | 4608 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7201LA15SOI Overview
The SOIC package contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.With a supply voltage of 5V volts, high efficiency is possible.28 terminations are contained in FIFO means.In order for FIFO design to operate, FIFO design requires a maximum current of 80mA .In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.An operating temperature of 85°C °C is necessary for stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .There are a total of 28 pins on this FIFO memory IC.Normally, the component owns 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.Voltage FIFO memory IC's maximum is set to 5.5V .A voltage above 4.5V is necessary for normal operation.FIFO memory ICs run at a frequency of 40MHz .
IDT7201LA15SOI Features
FIFOs category
Clock frequency of 40MHz
IDT7201LA15SOI Applications
There are a lot of Integrated Device Technology (IDT) IDT7201LA15SOI FIFOs Memory applications.
- Telecommunication
- Communications Systems
- Networking
- Computer networks
- Look-up Tables
- Application that requires re-writable nonvolatile parameter memory
- Laser Receiver System
- Communications
- Firmware loaders
- Video time base correction
