IDT7201LA25SOI
| Parameters | |
|---|---|
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Operating Mode | ASYNCHRONOUS |
| Clock Frequency | 28.5MHz |
| Supply Current-Max | 0.125mA |
| Access Time | 25 ns |
| Organization | 512X9 |
| Memory Width | 9 |
| Standby Current-Max | 0.0005A |
| Memory Density | 4608 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
IDT7201LA25SOI Overview
The SOIC package contains FIFO memory chip.Mounting it in the Surface Mount way is recommended.A supply voltage of 5V is capable of producing high efficiency.The number of terminations in FIFO means is 28 .For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.Its maximum operating temperature of 85°C °C ensures stable operation.In FIFOs , there is a self-contained gadget.It has a OTHER FIFO memory type IC.As a result, it contains a total of 28 pins.Normally, the component owns 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.Voltage FIFO memory IC's maximum is set to 5.5V .To ensure normal operation, the supply voltage should be greater than 4.5V (Vsup).This FIFO memory IC has a clock frequency of 28.5MHz .
IDT7201LA25SOI Features
FIFOs category
Clock frequency of 28.5MHz
IDT7201LA25SOI Applications
There are a lot of Integrated Device Technology (IDT) IDT7201LA25SOI FIFOs Memory applications.
- Test site
- Multi-stage synchronizer
- Network switching/routing
- Look-up Tables
- Microprogramming
- Game Controller
- TVs
- Thermal Management for DDR3 Memory Modules
- Portable Information Devices
- Fabrication Site
