IDT7201LA35SO8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 512X9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.0005A |
| Memory Density | 4608 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7201LA35SO8 Overview
You can find FIFO memory chip in the SOIC package.There's a Tape & Reel (TR) on the package.Surface Mount is memory IC's recommended mounting method.High efficiency is possible with a supply voltage of 5V .28 terminations are contained in FIFO means.In order for FIFO design to operate, a maximum current of 80mA is required.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget is self-contained and can be found in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.A total of 28 pins are present on the FIFO memory IC.There are normally 5V power supplies attached to the component.Additionally, this FIFO memory can be used to generate RETRANSMIT .It is set to 5.5V volts for the FIFO memory IC's maximum supply voltage.A voltage above 4.5V is necessary for normal operation.The FIFO memory IC runs at a frequency of 22.2MHz .
IDT7201LA35SO8 Features
FIFOs category
Clock frequency of 22.2MHz
IDT7201LA35SO8 Applications
There are a lot of Integrated Device Technology (IDT) IDT7201LA35SO8 FIFOs Memory applications.
- Wireless
- Smart Meter
- Multi-stage synchronizer
- Buses
- PC peripheral
- Alarm System
- Computer Systems
- IP Radio
- Desktop Computers
- Data communications
