Parameters |
Mount |
Surface Mount |
Package / Case |
SOIC |
Published |
2009 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
RETRANSMIT |
HTS Code |
8542.32.00.71 |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
225 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
28 |
JESD-30 Code |
R-PDSO-G28 |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Supply Voltage-Min (Vsup) |
4.5V |
Max Supply Current |
80mA |
Clock Frequency |
40MHz |
Access Time |
15 ns |
Organization |
1KX9 |
Output Characteristics |
3-STATE |
Memory Width |
9 |
Standby Current-Max |
0.0005A |
Memory Density |
9216 bit |
Parallel/Serial |
PARALLEL |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
FWFT Support |
No |
Output Enable |
NO |
Cycle Time |
25 ns |
Height Seated (Max) |
3.048mm |
Length |
18.3642mm |
Width |
8.763mm |
RoHS Status |
Non-RoHS Compliant |
IDT7202LA15SO Overview
The SOIC package contains FIFO memory chip.The recommended mounting way is Surface Mount .When the supply voltage is 5V , high efficiency is possible.A total of 28 terminations can be found in FIFO means.FIFO design requires a maximum current of 80mA to operate.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget in FIFOs is self-contained.There is a memory type OTHER FIFO in the IC of this part.A total of 28 pins are present on the FIFO memory IC.Normally, the component owns 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.In this case, the FIFO memory IC's maximum supply voltage is set to 5.5V .Keep the supply voltage (Vsup) above 4.5V for normal operation.There is 40MHz frequency set for the clock of the FIFO memory IC.
IDT7202LA15SO Features
FIFOs category
Clock frequency of 40MHz
IDT7202LA15SO Applications
There are a lot of Integrated Device Technology (IDT) IDT7202LA15SO FIFOs Memory applications.
- IP Camera Buffer
- Networking
- Telecommunication
- Thermal Management for DDR3 Memory Modules
- SPD for DDR3 Memory Modules
- Game Controller
- Portable Information Devices
- Measurement Equipment
- Routers
- Firmware loaders