IDT7202LA20SO
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 1KX9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.0005A |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | RoHS Compliant |
IDT7202LA20SO Overview
You can find FIFO memory chip in package SOIC .The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V , high efficiency is possible.FIFO means contains 28 terminations.In order to operate it, it requires 80mA volts of current.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.A self-contained gadget is contained within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.There are a total of 28 pins on this FIFO memory IC.It is normal for the component to own 5V power supplies.It is also possible to generate RETRANSMIT using this FIFO memory.There is a FIFO memory IC's maximum supply voltage of 5.5V (Vsup).Ideally, the supply voltage (Vsup) should stay above 4.5V .The FIFO memory IC is controlled by a clock with a frequency of 33.3MHz .
IDT7202LA20SO Features
FIFOs category
Clock frequency of 33.3MHz
IDT7202LA20SO Applications
There are a lot of Integrated Device Technology (IDT) IDT7202LA20SO FIFOs Memory applications.
- Multi-stage synchronizer
- Emulators
- Consumer
- Notebook
- Transistors
- SPD for DDR3 Memory Modules
- Character generators
- Event Recorder
- Firmware loaders
- Switches
