IDT7202LA25SO
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 1KX9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.0005A |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7202LA25SO Overview
You will find FIFO memory chip in the SOIC package.A Surface Mount mounting method is recommended.When the supply voltage is 5V , high efficiency is possible.A total of 28 terminations can be found in FIFO means.FIFO design requires 80mA amps of current to operate.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is self-contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.It has a total of 28 pins on it.It is normal for the component to own 5V power supplies.Additionally, RETRANSMIT can be generated with this FIFO memory.The FIFO memory IC's maximum supply voltage is set to 5.5V .As a general rule, keep the supply voltage (Vsup) above 4.5V in order to ensure normal operation.The clock of the FIFO memory IC runs at 28.5MHz frequency.
IDT7202LA25SO Features
FIFOs category
Clock frequency of 28.5MHz
IDT7202LA25SO Applications
There are a lot of Integrated Device Technology (IDT) IDT7202LA25SO FIFOs Memory applications.
- Magnetic memories
- Cameras
- SPI Bus Flash Memory Devices
- Test site
- Network bridges
- Desktop Computers
- Digital buffering
- Firmware loaders
- TVs
- Battery Charger
