IDT7202LA25SOI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 1KX9 |
| Memory Width | 9 |
| Standby Current-Max | 0.0005A |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7202LA25SOI Overview
SOIC is a package that contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains 28 terminations.There is a maximum current requirement of 80mA for its operation.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.There is a self-contained gadget within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.The FIFO memory IC is equipped with a total of 28 pins.It is normal for a component to be equipped with 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.Vsup is set to 5.5V (FIFO memory IC's maximum supply voltage).For normal operation, keep the supply voltage (Vsup) above 4.5V .The clock of the FIFO memory IC runs at 28.5MHz frequency.
IDT7202LA25SOI Features
FIFOs category
Clock frequency of 28.5MHz
IDT7202LA25SOI Applications
There are a lot of Integrated Device Technology (IDT) IDT7202LA25SOI FIFOs Memory applications.
- Signal processing
- Data
- Disk Controllers
- SPI Bus Flash Memory Device
- Optical memories
- Magnetic memories
- Data-acquisition systems
- Extended product life cycle
- Tape controllers
- Alarm System
