IDT7202LA35SO
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 1KX9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.0005A |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7202LA35SO Overview
The SOIC package contains FIFO memory chip.It is pointing in the direction of Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.FIFO consists of 28 terminations, which indicates that FIFO means is empty.In order for FIFO design to operate, a maximum current of 80mA is required.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.FIFOs contains this gadget in its entirety.There is a memory type OTHER FIFO in the IC of this part.As a result, it contains a total of 28 pins.Normaly, the component is powered by 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.The FIFO memory IC's maximum supply voltage is set to 5.5V .For normal operation, keep the supply voltage (Vsup) above 4.5V .The FIFO memory IC runs at a frequency of 22.2MHz .
IDT7202LA35SO Features
FIFOs category
Clock frequency of 22.2MHz
IDT7202LA35SO Applications
There are a lot of Integrated Device Technology (IDT) IDT7202LA35SO FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Industrial Systems
- Firmware loaders
- Look-up Tables
- SPI Bus Flash Memory Devices
- Multi-stage synchronizer
- Character generators
- A/D output buffers
- Routers
- Desktop Computers
