IDT7204L15SO
| Parameters | |
|---|---|
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.002A |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
IDT7204L15SO Overview
SOIC is the package in which FIFO memory chip is contained.Surface Mount is recommended as the mounting method.Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains a total of 28 terminations.FIFO design requires 120mA amps of current to operate.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.FIFOs contains this gadget in its entirety.There is a memory type OTHER FIFO in the IC of this part.As a result, it contains a total of 28 pins.The component normally owns 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .Voltage FIFO memory IC's maximum is set to 5.5V .In order to ensure normal operation, the supply voltage (Vsup) should be kept above 4.5V .This FIFO memory IC operates at a frequency of 40MHz .
IDT7204L15SO Features
FIFOs category
Clock frequency of 40MHz
IDT7204L15SO Applications
There are a lot of Integrated Device Technology (IDT) IDT7204L15SO FIFOs Memory applications.
- Temporary storage elements
- Routers
- Rate buffers
- Desktop Computers
- IP Camera Buffer
- TVs
- Computers
- Seismic Data Collection at Extreme Temperatures
- MP3 Interface for Automobile
- Wireless
