IDT7204L15SO8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.002A |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7204L15SO8 Overview
You can find FIFO memory chip in the SOIC package.This FIFO memory chip is packaged as a Tape & Reel (TR) .A Surface Mount mounting method is recommended.When the supply voltage is 5V , high efficiency is possible.I found that it has 28 terminations in FIFO means.In order to operate it, it requires 120mA volts of current.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.The FIFO memory IC has a total of 28 pins.The component normally owns 5V power supplies.It is also possible to generate RETRANSMIT using this FIFO memory.FIFO memory IC's maximum supply voltage is set to 5.5V .Keeping the supply voltage (Vsup) above 4.5V is essential for normal operation.A clock on the FIFO memory IC runs at a frequency of 40MHz .
IDT7204L15SO8 Features
FIFOs category
Clock frequency of 40MHz
IDT7204L15SO8 Applications
There are a lot of Integrated Device Technology (IDT) IDT7204L15SO8 FIFOs Memory applications.
- Test site
- Networking
- Buses
- Communications Systems
- Controlled baseline
- Programmable Logic Controller
- Tape controllers
- A/D output buffers
- Thermal Management for DDR3 Memory Modules
- Multi-stage synchronizer
