IDT7204L15SOI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Operating Mode | ASYNCHRONOUS |
| Clock Frequency | 40MHz |
| Supply Current-Max | 0.12mA |
| Access Time | 15 ns |
| Organization | 4KX9 |
| Memory Width | 9 |
| Standby Current-Max | 0.012A |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7204L15SOI Overview
You will find FIFO memory chip in the SOIC package.Mounting it Surface Mount is recommended.A supply voltage of 5V allows for high efficiency.FIFO consists of 28 terminations, which indicates that FIFO means is empty.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.It is contained within FIFOs .This part has a memory type of OTHER FIFO .It consists of a total of 28 pins.Normally, the component owns 5V power supplies.It is also possible to generate RETRANSMIT using this FIFO memory.A FIFO memory IC's maximum supply voltage of 5.5V is set for Vsup.For normal operation, keep the supply voltage (Vsup) above 4.5V .This FIFO memory IC operates at a frequency of 40MHz .
IDT7204L15SOI Features
FIFOs category
Clock frequency of 40MHz
IDT7204L15SOI Applications
There are a lot of Integrated Device Technology (IDT) IDT7204L15SOI FIFOs Memory applications.
- Data communications
- Network bridges
- Networking
- Controlled baseline
- General Data Collection Applications at Low-Temperatures
- Disk Controllers
- A/D output buffers
- Extended product-change notification
- Alarm System
- Test site
