IDT7204L20SO
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 120mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 4KX9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.002A |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7204L20SO Overview
This package is included in SOIC .The recommended mounting method for this FIFO products is Surface Mount .High efficiency is possible with a supply voltage of 5V .A total of 28 terminations can be found in FIFO means.FIFO design requires 120mA amps of current to operate.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.FIFOs contains this gadget in its entirety.In this part, the memory type is OTHER FIFO .A total of 28 pins are present on the FIFO memory IC.The component normally owns 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.There is a FIFO memory IC's maximum supply voltage of 5.5V .Maintain the supply voltage (Vsup) above 4.5V for normal operation.There is 33.3MHz frequency set for the clock of the FIFO memory IC.
IDT7204L20SO Features
FIFOs category
Clock frequency of 33.3MHz
IDT7204L20SO Applications
There are a lot of Integrated Device Technology (IDT) IDT7204L20SO FIFOs Memory applications.
- Character generators
- Application that requires re-writable nonvolatile parameter memory
- Transistors
- Communications
- Tape controllers
- Notebook
- Programmable Logic Controller
- Battery Charger
- Computer Systems
- Measurement Equipment
