IDT7204L25SO8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 120mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 4KX9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.002A |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7204L25SO8 Overview
You will find FIFO memory chip in the SOIC package.There is a case Tape & Reel (TR) in which it is packaged.Mounting it in Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.As a result of this, FIFO means contains 28 terminations.There is a maximum current requirement of 120mA for its operation.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.This gadget is self-contained in?FIFOs .A OTHER FIFO memory type IC is used in the part.As a result, it contains a total of 28 pins.Components normally possess 5V power supplies.Additionally, RETRANSMIT can be generated with this FIFO memory.The FIFO memory IC's maximum supply voltage is set to 5.5V .In order to ensure normal operation, the supply voltage (Vsup) should be kept above 4.5V .A clock on the FIFO memory IC runs at a frequency of 28.5MHz .
IDT7204L25SO8 Features
FIFOs category
Clock frequency of 28.5MHz
IDT7204L25SO8 Applications
There are a lot of Integrated Device Technology (IDT) IDT7204L25SO8 FIFOs Memory applications.
- Telecommunication
- Look-up Tables
- Test site
- Video time base correction
- Extended product life cycle
- Extended product-change notification
- Address mapping
- Analog-to-digital converters
- Computer networks
- Event Recorder
