IDT7204L25SOI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 120mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 4KX9 |
| Memory Width | 9 |
| Standby Current-Max | 0.002A |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7204L25SOI Overview
SOIC is the package in which FIFO memory chip is contained.The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V , high efficiency is possible.28 terminations are contained in FIFO means.There is a maximum current requirement of 120mA for its operation.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.It is self-contained in FIFOs .The IC of the part is of the type OTHER FIFO .The FIFO memory IC is equipped with a total of 28 pins.It is normal for the component to own 5V power supplies.It is also possible to generate RETRANSMIT using this FIFO memory.It is set to 5.5V volts for the FIFO memory IC's maximum supply voltage.To ensure normal operation, the supply voltage should be greater than 4.5V (Vsup).In this FIFO memory IC, the clock runs at frequency 28.5MHz .
IDT7204L25SOI Features
FIFOs category
Clock frequency of 28.5MHz
IDT7204L25SOI Applications
There are a lot of Integrated Device Technology (IDT) IDT7204L25SOI FIFOs Memory applications.
- Game Controller
- Look-up Tables
- Transistors
- GPS Offender Tracking
- High-speed disk
- Switches
- One assembly
- Optical memories
- Temporary storage elements
- Queues for communication systems
