IDT7204L35SO
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 120mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 4KX9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.002A |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7204L35SO Overview
SOIC is the package in which FIFO memory chip is contained.Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 5V , high efficiency is possible.FIFO means contains 28 terminations.In order for FIFO design to operate, FIFO design requires a maximum current of 120mA .At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is OTHER FIFO memory type.There are a total of 28 pins on this board.In normal circumstances, the component has 5V power supplies.This gadget can also be used to generate RETRANSMIT .Vsup is set to 5.5V (FIFO memory IC's maximum supply voltage).To ensure normal operation, make sure the supply voltage (Vsup) is above 4.5V .This FIFO memory IC has a clock frequency of 22.2MHz .
IDT7204L35SO Features
FIFOs category
Clock frequency of 22.2MHz
IDT7204L35SO Applications
There are a lot of Integrated Device Technology (IDT) IDT7204L35SO FIFOs Memory applications.
- Rate buffers
- Signal processing
- Computer networks
- Buses
- Product traceability
- Extended product life cycle
- Communications Systems
- Cardiac Monitoring Device
- Application that requires re-writable nonvolatile parameter memory
- Extended product-change notification
