IDT7204L50SO
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 120mA |
| Clock Frequency | 15MHz |
| Access Time | 50 ns |
| Organization | 4KX9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Standby Current-Max | 0.002A |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT7204L50SO Overview
FIFO memory chip is included in the SOIC package.Surface Mount is recommended as the mounting method.When the supply voltage is 5V , high efficiency is possible.In FIFO means, there are 28 terminations.For its operation, 120mA is the maximum current required.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .It consists of a total of 28 pins.Normally, the component owns 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.The FIFO memory IC's maximum supply voltage is set to 5.5V .To ensure normal operation, the supply voltage should be greater than 4.5V (Vsup).The FIFO memory IC is controlled by a clock with a frequency of 15MHz .
IDT7204L50SO Features
FIFOs category
Clock frequency of 15MHz
IDT7204L50SO Applications
There are a lot of Integrated Device Technology (IDT) IDT7204L50SO FIFOs Memory applications.
- Product traceability
- Consumer
- Buses
- Data-acquisition systems
- SPI Bus Flash Memory Device
- Controlled baseline
- Tape controllers
- Notebook
- SPD for DDR3 Memory Modules
- IP Radio
