IDT7208L20P
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | DIP |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 120mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 64KX9 |
| Memory Width | 9 |
| Standby Current-Max | 0.008A |
| Memory Density | 589824 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.576mm |
| Width | 15.24mm |
| RoHS Status | Non-RoHS Compliant |
IDT7208L20P Overview
The DIP package contains FIFO memory chip.Through Hole is memory IC's recommended mounting method.An input voltage of 5V results in high efficiency.In FIFO means, there are 28 terminations.There is a maximum current requirement of 120mA for its operation.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.The gadget is self-contained and can be found in FIFOs .It has a type OTHER FIFO memory IC.There are a total of 28 pins on this board.Components normally possess 5V power supplies.This gadget can also generate RETRANSMIT .The FIFO memory IC's maximum supply voltage is set to 5.5V .The supply voltage (Vsup) should remain above 4.5V to ensure normal operation.The FIFO memory IC's clock runs at a frequency of 33.3MHz .
IDT7208L20P Features
FIFOs category
Clock frequency of 33.3MHz
IDT7208L20P Applications
There are a lot of Integrated Device Technology (IDT) IDT7208L20P FIFOs Memory applications.
- HDD
- Portable Information Devices
- Down-Hole Energy Drilling
- Measurement Equipment
- GPS Offender Tracking
- Controlled baseline
- Video Processing
- Game Consoles
- Cameras
- IP Camera Buffer
