IDT7208L35P
| Parameters | |
|---|---|
| Number of Pins | 28 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 64KX9 |
| Memory Width | 9 |
| Density | 576 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.576mm |
| Width | 15.24mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Through Hole |
| Package / Case | PDIP |
IDT7208L35P Overview
You can find FIFO memory chip in the PDIP package.A Through Hole mounting method is recommended.A supply voltage of 5V allows for high efficiency.FIFO means contains 28 terminations.There are 28 pins on the operation pins.In order to operate it, it requires 120mA volts of current.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.In FIFOs , this gadget is self-contained.The IC of the part is OTHER FIFO memory type.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.There are a total of 28 pins on this FIFO memory IC.Components normally possess 5V power supplies.The gadget can also generate a value of RETRANSMIT .A clock running at frequency 22.2MHz is used by the FIFO memory IC.
IDT7208L35P Features
FIFOs category
Clock frequency of 22.2MHz
IDT7208L35P Applications
There are a lot of Integrated Device Technology (IDT) IDT7208L35P FIFOs Memory applications.
- Microprogramming
- Game Consoles
- Emulators
- Networking
- Controlled baseline
- Cameras
- Programmable Logic Controller
- Optical memories
- A/D output buffers
- Network switching/routing
