IDT72125L25SO
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PORTA/PORTB:PARALLEL/SERIAL |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 100mA |
| Clock Frequency | 28.6MHz |
| Access Time | 25 ns |
| Organization | 1KX16 |
| Output Characteristics | 3-STATE |
| Memory Width | 16 |
| Standby Current-Max | 0.006A |
| Memory Density | 16384 bit |
| Parallel/Serial | SERIAL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT72125L25SO Overview
FIFO memory chip is included in the SOIC package.It is pointing in the direction of Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.I found that it has 28 terminations in FIFO means.In order for FIFO design to operate, a maximum current of 100mA is required.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.FIFOs contains this gadget in its entirety.ICs of type OTHER FIFO are used in the FIFO memory chip.The FIFO memory IC is equipped with a total of 28 pins.Normaly, the component is powered by 5V power supplies.Additionally, this FIFO memory can be used to generate PORTA/PORTB:PARALLEL/SERIAL .The FIFO memory IC's maximum supply voltage is set to 5.5V .For normal operation, keep the supply voltage (Vsup) above 4.5V .A clock running at frequency 28.6MHz is used by the FIFO memory IC.
IDT72125L25SO Features
FIFOs category
Clock frequency of 28.6MHz
IDT72125L25SO Applications
There are a lot of Integrated Device Technology (IDT) IDT72125L25SO FIFOs Memory applications.
- Computers
- Extended product life cycle
- Multi-stage synchronizer
- Character generators
- Signal processing
- Industrial Systems
- Network bridges
- SPI Bus Flash Memory Devices
- Digital buffering
- Switches
