IDT72125L50SO
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PORTA/PORTB:PARALLEL/SERIAL |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 100mA |
| Clock Frequency | 15.4MHz |
| Access Time | 50 ns |
| Organization | 1KX16 |
| Output Characteristics | 3-STATE |
| Memory Width | 16 |
| Standby Current-Max | 0.006A |
| Memory Density | 16384 bit |
| Parallel/Serial | SERIAL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
IDT72125L50SO Overview
FIFO memory chip is contained in the SOIC package.Surface Mount is recommended as the mounting method.When the supply voltage is 5V , high efficiency is possible.FIFO consists of 28 terminations, which indicates that FIFO means is empty.FIFO design requires a maximum current of 100mA to operate.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 85°C °C is necessary for stable operation.In FIFOs , this gadget is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.Approximately 28 pins are attached to it.Normaly, the component is powered by 5V power supplies.With the help of this FIFO memory, PORTA/PORTB:PARALLEL/SERIAL can also be generated.A FIFO memory IC's maximum supply voltage of 5.5V is set for Vsup.In order to ensure normal operation, the supply voltage (Vsup) should be kept above 4.5V .The clock of the FIFO memory IC runs at 15.4MHz frequency.
IDT72125L50SO Features
FIFOs category
Clock frequency of 15.4MHz
IDT72125L50SO Applications
There are a lot of Integrated Device Technology (IDT) IDT72125L50SO FIFOs Memory applications.
- Communications Systems
- Rate buffers
- High-speed disk
- Buses
- Application that requires re-writable nonvolatile parameter memory
- Microprogramming
- Portable Information Devices
- Code converters
- Down-Hole Energy Drilling
- Transistors
