IDT723612L15PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX; PARITY GENERATOR/CHECKER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Access Time | 10 ns |
| Organization | 64X36 |
| Output Characteristics | 3-STATE |
| Memory Width | 36 |
| Density | 4.5 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
IDT723612L15PF Overview
This package is included in TQFP .The recommended mounting way is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.A total of 120 terminations can be found in FIFO means.120 pins are the operation pins.FIFO requires a minimum of 1mA current to operate.A voltage of 5V should be used for FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained in FIFOs .It has a type BI-DIRECTIONAL FIFO memory IC.FIFO may operate at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.A total of 120 pins are present on the FIFO memory IC.With a frequency of 66.7MHz , it exhibits good accuracy.The component normally owns 5V power supplies.This gadget can also generate MAIL BOX; PARITY GENERATOR/CHECKER .
IDT723612L15PF Features
FIFOs category
IDT723612L15PF Applications
There are a lot of Integrated Device Technology (IDT) IDT723612L15PF FIFOs Memory applications.
- GPS Offender Tracking
- Consumer
- Test site
- Network switching/routing
- Measurement Equipment
- Smart Meter
- Data
- Desktop Computers
- Product traceability
- Seismic Data Collection at Extreme Temperatures
