IDT723612L20PFI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAIL BOX; PARITY GENERATOR/CHECKER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| JESD-30 Code | S-PQFP-G120 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 1mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 64X36 |
| Memory Width | 36 |
| Standby Current-Max | 0.001A |
| Memory Density | 2304 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
IDT723612L20PFI Overview
You can find FIFO memory chip in the LQFP package.The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.In FIFO means, there are 120 terminations.FIFO requires a minimum of 1mA current to operate.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.It is self-contained in FIFOs .In this part, the memory type is BI-DIRECTIONAL FIFO .The FIFO memory IC is equipped with a total of 120 pins.The component normally owns 5V power supplies.It is also possible to generate MAIL BOX; PARITY GENERATOR/CHECKER with the use of this FIFO memory.In this case, the FIFO memory IC's maximum supply voltage is set to 5.5V .To ensure normal operation, make sure the supply voltage (Vsup) is above 4.5V .The clock of the FIFO memory IC runs at 50MHz frequency.
IDT723612L20PFI Features
FIFOs category
Clock frequency of 50MHz
IDT723612L20PFI Applications
There are a lot of Integrated Device Technology (IDT) IDT723612L20PFI FIFOs Memory applications.
- Application that requires re-writable nonvolatile parameter memory
- Video time base correction
- SPI Bus Flash Memory Devices
- A/D output buffers
- General Data Collection Applications at Low-Temperatures
- Disk Controllers
- Smart Meter
- Wireless
- Game Controller
- Optical memories
