IDT723613L15PF
| Parameters | |
|---|---|
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Access Time | 10 ns |
| Organization | 64X36 |
| Memory Width | 36 |
| Density | 2.3 kb |
| Standby Current-Max | 0.000001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
IDT723613L15PF Overview
FIFO memory chip can be found in the TQFP package.The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V , high efficiency is possible.In FIFO means, there are 120 terminations.120 pins are used for operation.FIFO design requires 1mA amps of current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .Keeping the temperature at 0°C degrees Celsius ensures its reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.There is a self-contained gadget within FIFOs .This part has a memory type of OTHER FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.The FIFO memory IC has a total of 120 pins.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.Normaly, the component is powered by 5V power supplies.
IDT723613L15PF Features
FIFOs category
IDT723613L15PF Applications
There are a lot of Integrated Device Technology (IDT) IDT723613L15PF FIFOs Memory applications.
- Transistors
- Industrial Systems
- Computers
- Telecommunication
- Digital buffering
- High-speed graphics pixel buffer
- Product traceability
- HDD
- Consumer
- Extended product-change notification
