IDT723614L15PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX; PARITY GENERATOR/CHECKER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Access Time | 10 ns |
| Organization | 64X36 |
| Output Characteristics | 3-STATE |
| Memory Width | 36 |
| Density | 4.5 kb |
| Standby Current-Max | 0.000001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
IDT723614L15PF Overview
FIFO memory chip is contained in the TQFP package.Mounting it in the Surface Mount way is recommended.A supply voltage of 5V allows for high efficiency.The number of terminations in FIFO means is 120 .There are 120 pins for operation.There is a maximum current requirement of 1mA for its operation.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.The gadget is self-contained and can be found in FIFOs .This part is equipped with an IC of type BI-DIRECTIONAL FIFO memory.FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.As a result, it contains a total of 120 pins.With a frequency of 66.7MHz , it exhibits good accuracy.Normally, 5V power supplies are owned by the component.Additionally, MAIL BOX; PARITY GENERATOR/CHECKER can be generated with this FIFO memory.
IDT723614L15PF Features
FIFOs category
IDT723614L15PF Applications
There are a lot of Integrated Device Technology (IDT) IDT723614L15PF FIFOs Memory applications.
- Data communications
- Application that requires re-writable nonvolatile parameter memory
- HDD
- Notebook
- SPI Bus Flash Memory Device
- GPS Offender Tracking
- Magnetic memories
- Network bridges
- Multi-stage synchronizer
- General Data Collection Applications at Low-Temperatures
