IDT723614L20PQF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX; PARITY GENERATOR/CHECKER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 132 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 1mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 64X36 |
| Output Characteristics | 3-STATE |
| Memory Width | 36 |
| Standby Current-Max | 0.000001A |
| Memory Density | 2304 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.57mm |
| Length | 24.13mm |
| Width | 24.13mm |
| RoHS Status | Non-RoHS Compliant |
IDT723614L20PQF Overview
The PQFP package contains FIFO memory chip.Surface Mount is recommended as the mounting method.If the supply voltage is set to 5V , high efficiency can be achieved.132 terminations are contained in FIFO means.For its operation, 1mA is the maximum current required.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.In FIFOs , this gadget is self-contained.The IC of the part is BI-DIRECTIONAL FIFO memory type.There are a total of 132 pins on this board.Normaly, the component is powered by 5V power supplies.With the help of this FIFO memory, MAIL BOX; PARITY GENERATOR/CHECKER can also be generated.In this case, the FIFO memory IC's maximum supply voltage is set to 5.5V .The supply voltage (Vsup) should remain above 4.5V to ensure normal operation.There is 50MHz frequency set for the clock of the FIFO memory IC.
IDT723614L20PQF Features
FIFOs category
Clock frequency of 50MHz
IDT723614L20PQF Applications
There are a lot of Integrated Device Technology (IDT) IDT723614L20PQF FIFOs Memory applications.
- A/D output buffers
- Medical Monitoring Device
- Optical memories
- Switches
- SPD for DDR3 Memory Modules
- Tape controllers
- General Data Collection Applications at Extreme High-Temperatures
- Measurement Equipment
- Notebook
- Portable Information Devices
