IDT723614L20PQFI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 132 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAIL BOX; PARITY GENERATOR/CHECKER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 132 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 1mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 64X36 |
| Memory Width | 36 |
| Standby Current-Max | 0.001A |
| Memory Density | 2304 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.57mm |
| Length | 24.13mm |
| Width | 24.13mm |
| RoHS Status | RoHS Compliant |
IDT723614L20PQFI Overview
FIFO memory chip is contained in the PQFP package.Mounting it Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO consists of 132 terminations, which indicates that FIFO means is empty.FIFO design has 132 operation pins.FIFO requires a minimum of 1mA current to operate.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.In FIFOs , there is a self-contained gadget.This part has a memory type of BI-DIRECTIONAL FIFO .A total of 132 pins are present on the FIFO memory IC.There are normally 5V power supplies attached to the component.It is also possible to generate MAIL BOX; PARITY GENERATOR/CHECKER with the use of this FIFO memory.There is a FIFO memory IC's maximum supply voltage of 5.5V .Keep the supply voltage (Vsup) above 4.5V for normal operation.In this FIFO memory IC, the clock runs at frequency 50MHz .
IDT723614L20PQFI Features
FIFOs category
Clock frequency of 50MHz
IDT723614L20PQFI Applications
There are a lot of Integrated Device Technology (IDT) IDT723614L20PQFI FIFOs Memory applications.
- Queues for communication systems
- Video Processing
- Analog-to-digital converters
- Rate buffers
- Address mapping
- Multi-stage synchronizer
- Digital buffering
- Temporary storage elements
- Application that requires re-writable nonvolatile parameter memory
- SPD for DDR3 Memory Modules
