IDT723653L12PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| JESD-30 Code | R-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 400mA |
| Clock Frequency | 83MHz |
| Access Time | 8 ns |
| Organization | 2KX36 |
| Memory Width | 36 |
| Standby Current-Max | 0.001A |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 12 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
IDT723653L12PF Overview
FIFO memory chip is included in the LQFP package.Surface Mount is recommended as the mounting method.With a supply voltage of 5V volts, high efficiency is possible.128 terminations are contained in FIFO means.FIFO design requires a maximum current of 400mA to operate.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.FIFOs contains this gadget in its entirety.A OTHER FIFO type memory IC is present in the FIFO memory chip.A total of 128 pins are present on the FIFO memory IC.It is normal for a component to be equipped with 5V power supplies.Additionally, this FIFO memory is capable of generating MAIL BOX as well.Vsup is set to 5.5V (FIFO memory IC's maximum supply voltage).Ideally, the supply voltage (Vsup) should stay above 4.5V .There is 83MHz frequency set for the clock of the FIFO memory IC.
IDT723653L12PF Features
FIFOs category
Clock frequency of 83MHz
IDT723653L12PF Applications
There are a lot of Integrated Device Technology (IDT) IDT723653L12PF FIFOs Memory applications.
- Computers
- TVs
- Address mapping
- Product traceability
- Rate buffers
- Communications Systems
- Laser Receiver System
- Telecommunication
- Networking
- Communications
