IDT723653L15PF8
| Parameters | |
|---|---|
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| JESD-30 Code | R-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 400mA |
| Clock Frequency | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX36 |
| Memory Width | 36 |
| Standby Current-Max | 0.001A |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
IDT723653L15PF8 Overview
FIFO memory chip can be found in the LQFP package.The package comes in a case of Tape & Reel (TR) .Surface Mount is recommended as the mounting method.When the supply voltage is 5V there is the possibility of high efficiency.FIFO means contains 128 terminations.FIFO requires a minimum of 400mA current to operate.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is self-contained in FIFOs .There is a memory type OTHER FIFO in the IC of this part.As a result, it contains a total of 128 pins.Normally, the component owns 5V power supplies.With the help of this FIFO memory, MAIL BOX can also be generated.It is set to 5.5V volts for the FIFO memory IC's maximum supply voltage.To ensure normal operation, the supply voltage should be greater than 4.5V (Vsup).A clock running at frequency 66.7MHz is used by the FIFO memory IC.
IDT723653L15PF8 Features
FIFOs category
Clock frequency of 66.7MHz
IDT723653L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) IDT723653L15PF8 FIFOs Memory applications.
- GPS Offender Tracking
- Data communications
- Firmware loaders
- Desktop Computers
- Portable Information Devices
- Programmable Logic Controller
- One assembly
- Product traceability
- Alarm System
- Data
