IDT72413L45P
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | DIP |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 25NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 60mA |
| Access Time | 19 ns |
| Organization | 64X5 |
| Output Characteristics | 3-STATE |
| Memory Width | 5 |
| Standby Current-Max | 0.00009A |
| Memory Density | 320 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 22.22 ns |
| Height Seated (Max) | 4.191mm |
| Length | 26.162mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
IDT72413L45P Overview
You can find FIFO memory chip in package DIP .Mounting it in Through Hole is recommended.When the supply voltage is 5V there is the possibility of high efficiency.The number of terminations in FIFO means is 20 .The maximum current required for its operation is 60mA .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.A total of 20 pins are present on the FIFO memory IC.The component normally owns 5V power supplies.Additionally, this FIFO memory is capable of generating FALL THRU 25NS as well.A FIFO memory IC's maximum supply voltage of 5.5V is set for Vsup.The supply voltage (Vsup) should remain above 4.5V to ensure normal operation.
IDT72413L45P Features
FIFOs category
IDT72413L45P Applications
There are a lot of Integrated Device Technology (IDT) IDT72413L45P FIFOs Memory applications.
- Data-acquisition systems
- Laser Receiver System
- Extended product life cycle
- Cardiac Monitoring Device
- Look-up Tables
- Buses
- Extended product-change notification
- Portable Information Devices
- Computers
- Consumer Systems
