IDT72T20118L10BB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 208 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALTERNATIVE MEMORY WIDTH 10 |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Access Time | 4.5 ns |
| Organization | 128KX20 |
| Memory Width | 20 |
| Density | 2.5 Mb |
| Standby Current-Max | 0.05A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Alternate Memory Width | 10 |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.97mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
IDT72T20118L10BB Overview
You can find FIFO memory chip in the BGA package.A Surface Mount mounting method is recommended.High efficiency is possible with a supply voltage of 2.5V .FIFO means contains 208 terminations.These are the 208 pins for operation.There is a maximum current requirement of 60mA for its operation.Set the supply voltage to 2.5V to ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.In FIFOs , there is a self-contained gadget.This part has a memory type of OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 2.375V volts.A maximum supply voltage of 2.625V volts can be handled by the FIFO memory chip.Approximately 208 pins are attached to it.When the frequency is set to 100MHz it can maintain good accuracy.With the help of this FIFO memory, ALTERNATIVE MEMORY WIDTH 10 can also be generated.
IDT72T20118L10BB Features
FIFOs category
IDT72T20118L10BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72T20118L10BB FIFOs Memory applications.
- Telecommunication
- Disk Controllers
- Video time base correction
- Video Processing
- Firmware loaders
- Network switching/routing
- Notebook
- Programmable Logic Controller
- Game Consoles
- Temporary storage elements
