IDT72T20118L4BB
| Parameters | |
|---|---|
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Access Time | 3.2 ns |
| Organization | 128KX20 |
| Memory Width | 20 |
| Density | 2.5 Mb |
| Standby Current-Max | 0.05A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Alternate Memory Width | 10 |
| Output Enable | YES |
| Cycle Time | 4 ns |
| Height Seated (Max) | 1.97mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 208 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALTERNATIVE MEMORY WIDTH 10 |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
IDT72T20118L4BB Overview
You will find FIFO memory chip in the BGA package.Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 2.5V , high efficiency is possible.In FIFO means, there are 208 terminations.In the case of the operation pins, they are 208 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .FIFO is recommended that the supply voltage be set to 2.5V for maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.There is a self-contained gadget within FIFOs .A OTHER FIFO memory type IC is used in the part.Typically, FIFO would work at 2.375V volts, but it may also work at higher voltages.An input voltage of 2.625V V is the maximum that FIFO memory can handle.A total of 208 pins are present on the FIFO memory IC.In spite of the frequency 250MHz , it is capable of maintaining a good level of accuracy.It is also possible to generate ALTERNATIVE MEMORY WIDTH 10 by using this FIFO memory.
IDT72T20118L4BB Features
FIFOs category
IDT72T20118L4BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72T20118L4BB FIFOs Memory applications.
- IP Camera Buffer
- Data-acquisition systems
- Computer Systems
- Medical Monitoring Device
- Multi-stage synchronizer
- General Data Collection Applications at Extreme High-Temperatures
- Microprogramming
- Test site
- Industrial Systems
- Video Processing
