IDT72T20118L6-7BB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 208 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALTERNATIVE MEMORY WIDTH 10 |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Access Time | 3.8 ns |
| Organization | 128KX20 |
| Memory Width | 20 |
| Density | 2.5 Mb |
| Standby Current-Max | 0.05A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Alternate Memory Width | 10 |
| Output Enable | YES |
| Cycle Time | 6.7 ns |
| Height Seated (Max) | 1.97mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
IDT72T20118L6-7BB Overview
You can find FIFO memory chip in package BGA .It is recommended that memory IC be mounted in the Surface Mount direction.High efficiency is possible with a supply voltage of 2.5V .As a result of this, FIFO means contains 208 terminations.As far as the operation pins are concerned, they are 208 pins.In order for FIFO design to operate, a maximum current of 60mA is required.A voltage of 2.5V should be used for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is contained within FIFOs .The IC of the part is of the type OTHER FIFO .FIFO may operate at very low supply voltages, such as 2.375V volts.There is a maximum supply voltage of 2.625V volts that FIFO memory can handle.Approximately 208 pins are attached to it.It maintains good accuracy at a 150MHz frequency.It is also possible to generate ALTERNATIVE MEMORY WIDTH 10 by using this FIFO memory.
IDT72T20118L6-7BB Features
FIFOs category
IDT72T20118L6-7BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72T20118L6-7BB FIFOs Memory applications.
- IP Radio
- Digital buffering
- Computers
- Optical memories
- Consumer
- Analog-to-digital converters
- Temporary storage elements
- IP Camera Buffer
- Look-up Tables
- High-speed graphics pixel buffer
